| Product items | Infrared radiation (IR) Temperature and Time | UV Energy | Applicable Materials and Features |
| UVB-728 “Glass & Ceramics” UV Base Coat | 60-70°C ; 3-6 mins | 800-1000 mj/cm2 | Applicable to Glass, Ceramic. Excellent performance on oil resistance, coverage, adhesion, fullness, gloss. |
| UVB-756 "Metals" UV Base Coat | 60-70°C ; 3-6 mins | 800-1000 mj/cm2 | Applicable to Metals. Excellent oil resistance, coverage, adhesion, fullness, gloss. |
| UVB-725 “Heat Resistance” UV Base Coat | 60-70°C ; 3-6 mins | 800-1000 mj/cm2 | Applicable to heat resistance PC materials.Excellent performance on heat resistance, adhesion, gloss. |
| UVB-768A UV Base Coat | 60-70°C ; 3-6 mins | 600-800 mj/cm2 | Applicable to ABS, PC. Excellent performance on fullness, viscosity, coverage, adhesion, gloss. |
| UVB-768K "Low Energy Curing" Base Coat | 60-70°C ; 3-6 mins | 300-500 mj/cm2 | Applicable to ABS, PC. Excellent performance on low curing energy, adhesion, leveling, oil resistance, gloss. |
| UVB-768 UV Base Coat | 60-70°C ; 3-6 mins | 600-800 mj/cm2 | Applicable to ABS, PC. Excellent performance on oil resistance, conerage, adhesion, fullness, gloss. |
| UVP-917 P.P UV Base Coat | 60-70°C ; 3-6 mins | 800-1200 mj/cm2 | Applicable to Pre-treated P.P materials. Excellent performance on adhesion, bending resistance, crack resistance. |
| UVB-785 “Heat Resistance” UV Base Coat | 60-70°C ; 3-6 mins | 2500-3000 mj/cm2 | Applicable to BMC, PBT. Excellent performance on heat resistance, adhesion, gloss. |
1. Above figures are based on our equipment and experience. Customers need to adjust the figures based on equipment, materials, and producing environment even machines if necessary. If finished products don’t meet customers’ requirement, please stop using and contacting our sales.
2. The procedure of Infrared Radiation (IR) Temperature, Time, and UV energy must fulfill the requirements to ensure quality of coating products. UV energy will decrease by UV lamp aging and voltage supply. Please replace with new UV lamp and stable voltage to ensure coatings dry.
3. Please keep good air circulation in working place to avoid harming health by breathing in solvent for long term and contacting with skin. If chemicals splash inti eye accidently, immediately flush eye with water and send to medical treatment.
