| Product items | Packing Standard | Instruction | Application |
| UV-95 Rework Primer | 16 KG / 5 GAL | Rework on defection of UV Coating | Spraying on defection of UV Coating. After UV-95 dries, restart UV coating process. |
| UP-98 UV Processing Primer | 16 KG / 5 GAL | Improve adhesion on P.P materials, Metals, MMA, Nylon before UV Base Coating. | Sparying on materials then applying UV Base Coats. |
| T-407 Thinner | 13.5 KG / 5 GAL ; 135 KG / 50 GAL | Diluted with Base Coat for Spraying/Dipping | The Dilution Ratio for Base Coats dipping is 1 : 1-2; for Top Coats dipping is 1 : 3-4. The Dilution Ratio for Base Coat Spraying should depend on materials and application. |
| UP-90 P.P Processing Primer | 16 KG / 5 GAL | Improve adhesion on P.P materials | Spraying/Dipping P.P materials before spraying/dipping base coats. Or add into base coats for spraying/dipping directly. |
| T-497 Thinner | 16 KG / 5 GAL | Diluted with UR-487 “Multi-Chrome” Base Coat for Spraying / Dipping. | Depend on materials and application, dilution ratio for base coat dipping = 1 : 1-1.5; for base coat spraying = 1 : 0.5. |
| Clean solvent | 13 KG / 5 GAL | Release Agent / Oil Cleaner | Dipping the substrates or wiping it by anti-electrostatic and cotton cloth. Attention to the solvent and cloth usage times |
| T-727 Removing Solvent | 18 KG / 5 GAL | Removing the coatings and aluminum layer of defection for reworking. | Dip the defection into T-727 for few minutes, coatingsand and aluminum layer will be removed. Attention to the decrease removing strength. |
| S-53 Bubble Reducer | 3 KG / 1 GAL | Reduce Bubble for Dipping types of Base Coat. | Add into diluted base coats. The ratio is 17000g : 100-150g and it can be adjusted base on requirement. Applying after stirring evenly. |
| S-28 Abrasion Resistance Agent | 1 KG / Can | Add into air dry types of Top Coats for more abrasion resistance | Add into air dry types of Top Coats. The ration is 16000g : 20-30g. Applying after stirring evenly. |
| ST-6219 Solvent | 135 KG / 50 GAL | Diluted with base coat for quick drying or materials cleaner. | Dilution Ratio of Base Coats for dipping is 1 : 1-2. Or mix with T-407 to improve viscosity. Clean the materials. |
| ST-6029 Solwent | 160 KG / 50 GAL | Base Coat leveling/duilted to avoid foggy. | It can be used to improve levelng of Base Coats or adjust T-407 Thinner to improve workability in humid environment. Or add with ST-6219 to avoid foggy. |
| FA-110 Matting Paste | 15 KG / 5 GAL | Add For Matting Effect. | Add FA-110 into Top Coat for matting effect or for smooth surface. |
